Main uses
This product is widely used in chemical, fine chemical, food and other industries, such as antibiotic, vitamin, pharmaceutical intermediate and other pharmaceutical products; salt, gourmet powder, food additive, starch, chemical flavouring agent and other fooeds; ammonium sulfate, gypsum, mirabilite, copper sulfate, potassium chloride, borax, dye, pigment, and other chemical raw materials. 
Main features
?♦ Flat structure, low center of gravity, and stable operation; four-point supporting, liquid damping, improve vibration isolating and vibration damping performance. 
?♦ Inhead type direct drive on motor can pretect from dust pollution. 
?♦ Large aspect ratio and loading capacity. 
?♦ Frequency converter start, dynamic braking, regenerative braking, PLC program control, touch screen, equipment failure self-diagnostic, automatic human-computer interface control, and DCC control interface. 
?♦ Scraper discharge and reduce working strength, shorten separtion cycle, and increase output. It is suitable for toxic occasions. 
?♦ Gas blowback and gas-assisted scraper device can reduce residual filter cake to the minimum and to faciliate filter cloth regeneration. 
?♦ Detachable liquid block. Easy to replace filter cloth. 
?♦ Nitrogen protection system. Suitable for flammable or explosive occasions. 
?♦ Surface roughness is as high as Ra0.2-0.4um and meets GMP standards. 

Configuration selection
?♦ Drum structure: removable and non-removable liquid block
?♦ Scraper discharge: pneumatic and hydraulic
?♦ Motor drive: common motor, explosion-proof motor and variable frequency motor
?♦ Brake mode: energy consumption and feedback
?♦ Material level monitoring: contact and non-contact
?♦ Distribution mode: single tube and multiple-tube lateral distribution tube
?♦ Electrical components: Brand supply
?♦ Residual filter cake treatment: gas reverse blowing, gas-assisted scraper
?♦ Surface treatment: Mirror polishing, drawing, matting and passivating
?♦ Safety protection: nitrogen protection system, vibration protection, temperature protection, speed monitoring, overload protection and electromechanical interlocking
?♦ Nitrogen protection: automatic nitrogen charging device, oxygen content detection device, liquid seal device and gas-liquid separation device

Materials: 
?♦ Stainless steel 304, 321, 316, 316L and Ti
?♦ Carbon steel or stainless steel coating PE, PP, HALAR (F30), PTFE (F4)

Working process



Technical parameters